Lessons Learned from Years with Floors
Steps to Refinishing Your Hardwood Floor.
There are many benefits of investing in a hardwood floor but also, they come with many responsibilities. The reason why it is great responsibilities because, with time, it can wear off meaning you either need to replace or refinish them. You should conduct some inspections to define if you will replace the hardwood flooring materials or refinish them. When it comes to refinishing your hardwood floor, you can decide to do-it-yourself or engage professionals to do it. Read more below to learn on how to the furnish hardwood floor.
When it comes to refinishing the hardwood floor, you will need to have the appropriate materials that will be used in this process. There are a number of refinishing materials you need to have before you start the process which can include the shop vac, shop rags, sandpapers, stain application pad, furnish foam rollers, oil-based stains and so on. If you don’t know much about purchasing this equipment, you can engage professionals for advice. After getting the materials, you now prepare the floor which can include removing carpet tacks, nails, and other objects.
After removing the object from the floor, you should know surgery floor using the 60-grit sandpaper and the belt sander. The same procedure should be repeated more than once with different sizes of sandpapers and afterward use the shop vac in removing the dust in the debris.
After dealing with dust and debris, start water popping. Water popping is the process that is meant to get the floor wet to raise the greens. When water is used for after clearing the dust, it is helping the wood in absorbing the stains. You need to therefore so dip the rag in the water of which is use it after wants to wipe the floor.
The next step is to stain the floor used oil-based stains and the stain applicator pads. After you apply the first oil-based stains, you are supposed to give it 24 to 48 hours to dry. Polyurethane is then applied after the oil-based stains have dried up using the foam roller of which you are advised to give at least two hours to dry.
Now after you are done with the coating, it is time you start the buffing using the 220-grit screen. After buffing, you should wipe the floor so that you can apply the second coating using polyurethane of what you should repeat this same process for 3-4 times. After you’re done with this process, your floor will be a brand-new. There is much to discover about hardwood floors and how to take care of them and when you want to refund issue or by yourself, it is important that you have relevant info which is readily available on the Internet.